| |
 |
|
| |
| STP-V01 |
| Features |
- Inverter motor drive for horizontal and vertical
axes
- Sixteen (16) percent less price than our
predecessor
- Twenty seven (27) percent smaller footprint
compared to our predecessor
- Reduced box change time as short as 15 seconds
- Custom box sizes acceptable (See Mechanical
Specification)
- Controller-on-body design for space saving
- Standard palletizing capability
- Standard three-light signal tower (red, yellow,
and green)
|
| Download |
  |
| Specification |
| Mechanical
Specification |
|
Outer dimensions (L x W x H)
(mm) |
165 X 716 X 1825 |
| Max. parts receiving
height(mm) |
1600 |
| Max. horizontal
travel(mm) |
1000 |
| Weight capacity
(including boxes)(kg) |
10 |
| Max. box size(mm) |
800(L) - 500(W) |
| Box change
time(seconds) |
15 |
| Palletizing stop
accuracy(mm) |
±1 See Note. |
| Working air
pressure(Mpa) |
0.5 |
| Standard conveyor
size(mm) |
1660 (300 pitch) |
|
Optional conveyor
size(mm) |
IN conveyor
(Chain) |
1.0 to 3.0m at 0.5m
intervals (300 pitch) |
OUT
conveyor
(Roller) |
300, 400, 500 or 600
wide |
| 1.0 to 3.0m at 0.5m
intervals |
| Controller
Specification |
| Power supply(V) |
3-phase, 200VAC
50/60Hz
Allowable voltage fluctuation
±10%
Allowable frequency fluctuation ±5% |
| Current
consumption(A) |
10 |
| Rated power(W) |
500 |
| Drive motor(KW) |
0.2 for both axes, gear
ratio 1/20 |
| Control system |
Stored
program |
Note : Practically, allow for the
clearance between fingers and a box. |
| Controller |
|
STP dedicated controller
- User-friendly 5 inch touch panel interface
- Max. 40 mold setups
- Easy and intuitive operation
 |
| Option |
- A wide variety of IN conveyors
- A wide variety of OUT conveyors
- A complete range of arms
- A broad selection of fingers
|
| |
|
