| |
|
|
Robots
for precision molded parts SH/PH/UT Series
|
| SH-700 |
| Features |
- Side entry robot for precision molding
- Long stroke applicable for up to 50 tons of
press
- Low overhead installation
- High cycle
- Low impact on a press for consistent molding
operation
- Small footprint for secondary equipment
- Wrist rotation (90Á) to work with secondary
equipment
- Part verification camera (option)
|
| Download |
 |
| Specification |
| Model |
SH-700 |
| Entry stroke(mm) |
750 |
| Strip stroke(mm) |
315 |
Min. distance between
gripper
and frame (mm) |
72 |
Max. distance between
gripper
and frame(mm) |
445 |
| Wrist rotation(°) |
90 |
| Max. payload (kg) |
1
(2)(including EOAT)* |
| Machine weight(kg) |
130 |
| Working air
pressure (Mpa) |
0.5 |
| Control system |
PTP•CP |
| Power supply(V) |
3 phase 200VAC±10%
50H/60Hz |
| Power consumption(W) |
340(MAX) |
*Max. payload is
obtained by gain adjustment. |
| Controller |
|
HRS-110
 7.7 inch 128 color LCD
- 20 mold setup memory
- Safety switch to avoid mis-operation
|
| Option |
- Vacuum system with vacuum break
- Air blow circuit
- Special safety guard
|
| |
|
