| |
|
|
Robots
for precision molded parts SH/PH/UT Series
|
| SH-400G |
| Features |
- Side entry robot for precision molding
- Long stroke applicable for up to 50 tons of
press
- Low overhead installation
- High cycle
- Low impact on a press for consistent molding
operation
- Small footprint for secondary equipment
- Wrist rotation (90Á) to work with secondary
equipment
- Part verification camera (option)
- For three-plate mold
|
| Download |
  |
| Specification |
| Model |
SH-400G |
| Press range (ton) |
(5 - 15) |
| X1 entry stroke (mm) |
520 |
| Y1 strip stroke (mm) |
213 - 438 |
| X2 entry stroke (mm) |
520 |
| Y2 strip stroke (mm) |
150 - 375 |
| Min. distance between gripper
and frame (mm) |
102 |
| Max. distance between gripper
and frame(mm) |
438 |
| Wrist rotation (°) |
90 |
| Max. payload (kg) |
1[2](including
EOAT)* |
| Machine weight (kg) |
125 |
| Overall height x width x depth
(mm) |
(782+nozzle center) x 682 x
1090 |
| Working air
pressure (Mpa) |
0.5 |
Air consumption(N /min) |
1.2 |
| Control system |
PTP•CP |
| Power supply (V) |
Single phase 200VAC±10%
50H/60Hz |
| Power consumption (W) |
Max.460 |
Note 1: Max. payload
includes EOAT weight.
Note 2: For air consumption,
additional 70NL/min is consumed in using vacuum
ejector.
* Gain adjustment allows max. 2 kg.
|
| Controller |
|
HRS-110
 7.7 inch 128 color LCD
- 20 mold setup memory
- Safety switch to avoid mis-operation
|
| Option |
- Vacuum system with vacuum break
- Air blow circuit
- Special safety guard
|
| |
|
