Robot
+ Box filling system
+ Conveyor
+ Granulator
+ EOAT
  
HLC-150S/G(All Pneumatic)

Features
  • Reasonable all pneumatically driven robot
  • Functional and sophisticated design
  • Drastically reduced electricity cost (sprue picker level)
  • Press range: 50 to 220 tons
Download
CatalogDimensions
Specification
Model HLC-150S HLC-150G
Main arm vertical stroke
(mm) 		800
Main gripper height
(mm)		 150
Main arm kick stroke
(mm) 		150
Sub arm vertical stroke
(mm)		 - 850
Sub gripper height
(mm)		 - 200
Sub arm kick stroke
(mm)		 - 100
Max. distance between main arm and platen
(mm)		 780
Min. distance between sub arm and platen
(mm)		 - 55
Traverse stroke
(mm) 		1400
Wrist flip angle(°) 90
Max. payload(kg) 3(including EOAT)
Working air pressure(Mpa) 0.6
Air consumption(NL/cyc) 30.5 35.3
Drive system Air cylinder
Power supply(V) Single phase 200VAC ±10% (50Hz - 60Hz)
Powers(W) Power consumption 15W; Apparent power 20VA; Integral power consumption 12Wh
Control system Stored program

*Additional 70NL/min is consumed when vacuum ejector is used.
Controller

 PC-mxII

  • Controller cabinet mounted on the body
  • Standard 16 mold memories for short setup time
    15 sequences available
  • Picture switch for easy operation
  • Intuitive operation
Functions

 Standard

  • A vacuum ejector circuit
  • A part gripper circuit
  • A main sprue gripper circuit (valve shared with sub gripper)
  • Slow down at part release
  • In-mold/on-beam part and sprue release
  • Above-mold/on-beam wrist flip
  • Traverse-out/Traverse-in sprue release
 Typical Option
  • Conveyor start signal
  • Box filling system start signal
  • Custom color
  • Traverse beam stanchion
  • EOAT nipper circuit

top